auto cad interview bits.
1. From which direction
does AutoCAD start measuring angles?
A. 12 o'clock
B. 3 o'clock
C. 6 o'clock
D.9 o'clock
2. What does WCS stand
for?
A.Western CAD System
B. Worldwide Coordinate Sectors
C.World Coordinate System
D.Wrong CAD Settings
3. When drawing in 2D,
what axis do you NOT work with?
A.X
B.Y
C.Z
D WCS
4. 1s 300 degrees the same
as 60
Degrees in a drawing?
A.Yes
B.No
C.Not always
D.Never
5. Which one of these will
NOT start the Print command?
A.Typing PLOT
B.Typing PRINT
C.Pressing Control+P
D.Pressing Alt+P
6. What should you pay
attention to when learning AutoCAD?
A.The Command Line
B.The Status Bar
C.The Title Bar
D.Tool Icons
7. Polar coordinates are
used mostly for drawing...?
Circles
Arcs
Vertical lines
Angled lines
8. Which keystrokes will
UNDO a command
Control+U
Alt+U
Control+Z
Alt+Z
9. When using the TRIM
command, which do you select first?
The cutting edges
The object to be trimmed
Everything
Nothing
10. How many snap points
does an object have?
One
Two
Depends upon the object
At least four
11. How many points do you
need to define for the rectangle command?
One
Two
Four
None
12. How many AutoCAD
objects are in a rectangle?
None
One
Four
Eight
13. If you draw a line at
270 degrees, it will point:?
Up
Down
Left
Right
14. How long will a line
from 1,4 to 4,4 be?
Four units
Eight Units
Can't accurately tell
from those coordinates
Three Units
15. How long will line
from 1,4 to @4<5 be?
Three units
Four units
Five units
6.4031 units
16. How many points do you
need to draw a line using Absolute Coordinates?
None
One
Two
Four
17. When selecting
objects, pressing 'L' will:
Select lines only
Select objects when you
move your mouse to the left
Select the last object
created
Select the last object
you modified
18. Pressing Shift while
you are selecting will?
Allow you to draw a
window
Automatically delete the
object(s)
Remove the next selected
object from the set
Highlight the selected
objects
19. Pressing 'F' when
selecting objects will...
Allow you to draw a
fence
Finish the selection set
Limit you to five
objects
Allow you to find
specific text
20. How you select the
last set of object(s) you selected?
Type 'L'
Type 'P'
Type 'H' to highlight
them
You can not do this
21. What is the best way
of drawing a rectangle?
Using the Line command
Using the Polyline
command
Using the Rectangle
command
Using the Multiline
command
22. To move something four
untis to the right,
what would be the 2nd
point of displacement?
@4,0
@4<0
Neither 1 nor 2
Both 1 and 2
23. How should you select
objects when using the stretch command?
With a crossing window
Pick them one by one
Hold the shift key while
selecting
Type 'S'
24. The origin of a
drawing is at:
The first point you
select
0,0
A random point in space
10,10
25. Objects are rotated
around the
Base point
Bottom right of the
object
Centre of the object
Origin
26. The fillet command
creates:?
Sharp Corners
Round Corners
Round and Sharp Corners
A boneless fish
27. A polar array creates
new objects...
In a grid pattern
In a straight line
In a circular pattern
In an northern pattern
28. The distances of a
chamfer are:
Always different
Always the same
Sometimes different
Never the same
29. You should use Osnaps
when you dimension...
Never
Always
Only on lines
Only on arcs and circles
30. How many layers should
a drawing have?
One
Ten
One for each object
As many as are needed to
clearly display the objects
31. When can you change
the height of your text?
Only when you start the
drawing
Only in a special text
dialog box
When you are starting
the Text command
You can't, it is preset
by AutoCAD
32. Scaling objects makes
them...
Bigger
Smaller
It only streches them
Both Bigger and Smaller
33. How many view do you
need Orthographic Projection?
1
2
3
As many as are needed
34. Does it matter which
Hatch pattern you use in Section views?
Yes
No
Only if it is steel
Sometimes
No comments:
Post a Comment